When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Strike that, hyper-flash wasn't displayed until the headlights were actually on (was testing during daytime). So I'm still looking for any guidance on disabling it via ForScan. The image below contains the default configuration on my vehicle as reported by ForScan (BdyCM module). First off, am I in the correct module to make this change in disabling hyper-flash? Secondly, do I simply change the code from 726-27-01-0320-05F0-6D to 726-27-01-0020-05F0-6D? Thanks in advance!
EDIT: Sorry for all the posts and edits. As I said, still learning with all of this. As another update, I figured it out. I was NOT in the correct module (BdyCM As Built) as this I believe would have been configuring the system using the "advanced" method. Once I entered just the standard BdyCM module, everything had a more intuitive naming convention versus that of just codes. So then I simply modified the two modules as detailed by the image below. Pretty simple and perhaps this will help anyone else looking for some additional guidance on disabling hyper-flash.
Had a Hyperflash on the left side. All LED bulbs including brake light. All bulbs worked perfectly well. No issue on the right side. Made this change anlso and my sanity is restored.
Thank you so much for this post!!!
Worked like a charm!!
