Can I use my OBD connector from my sct x4 to link to my truck via laptop and forscan?

 

Probably a question for the forscan sticky thread.

 

Like OBDII to USB?

Or would you be running through the SCT X4?

 

I asked and haven't got a answer

 

The wire from my sct has a hdmi type plug I plugged it into the computer and into the the socket under the dash but I can't get it to connect it's saying no elm

 

i dont think a tuner is the same as a elm327 device? try picking up one of the confirmed working ones, they can be had cheap

 

NO

 

What cwcb08 said ^^^. Don't waste your time with the cheapo ebay ones. Go ahead an get the OBDLink MX

 

Do an ebay search for this (ELM327 USB V1.5 modified for Ford ELMconfig CH340) if you have a laptop. when I got mine it was more but now is cheap if you have a laptop. I am running win 10 and it works no issue.

 

2nd that comment.
I messed around with a cheap one i had laying around before even getting the truck, not recognizing the truck sometimes, flipping switch for hscan/mscan.
MX is so much faster and more reliable. Especially as you get addicted to changes, and realize you may use this much more than you ever thought you would.