Fender Emblem replacement
#1
Senior Member
Thread Starter
Fender Emblem Alternate Logos
Trying something to replace the giant F150 emblem and cover all those holes. Maybe a conversation starter too.
Last edited by kevin1727; 11-21-2017 at 05:20 PM.
#4
Senior Member
That will only work on the 2015-2017 F150 since the displacement changed in 2018 with the new dual enjection engine. I think the 2018 is a 308ci.
#5
Senior Member
If someone can or knows someone who could make this to replace the F150 XLT emblem on the side of my truck you will instantly become my favorite person on earth. Need to pop it off and find something to cover dem holes.
#6
Senior Member
Thread Starter
I got the coyote head at Fanatics. It is actually the Arizona NHL Coyote emblem. I see a metal Seahawks emblem there but it doesn't have the skyline. The Coyote head is only big enough to cover the two holes that are close together. Had to use the 302 emblem for the other holes. I could have got a 5.0L emblem but thought 302 was more old school.
#7
Senior Member
Thread Starter
My grandson will like the coyote head so that's a plus.
I'm not into having other people's names all over my clothes, cars, etc. I see it as being sucked into becoming a walking advertisement. My next step is to get rid of the Ford ovals front and back.
Last edited by kevin1727; 11-21-2017 at 06:46 PM.
Trending Topics
#8
Senior Member
Thread Starter
I actually calculated the CID from the Ford web site specs to make sure the 302 was correct on my 2017.
Last edited by kevin1727; 11-21-2017 at 07:16 PM.
#9
About the only thing that I found that looked good was buying some fender vents. The downside is that the few I have seen require you to cut into the fender to make them fit properly.
I will probably just buy a spare set and paint them or buy a painted set from someone.
I will probably just buy a spare set and paint them or buy a painted set from someone.
The following users liked this post:
Liv'nbytheBungie74 (11-27-2017)