Factory Fender Flare Hardware
#21
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
Ok I see what your saying now... I just check the flares as I have them still in the box wrapped up - I had previously unwrapped a rear one but not the front. On the front I have all of the clips EXCEPT the very front two on each side.
#23
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
It appears that you can indeed buy the white clips (for 2.20 a piece)... just found this on fordparts.com
#25
Junior Member
Firerunner: thanks for the diagram!
Could you provide the HB1 callout details (the bolt for underside fender flare mount)
I need ~0.25 inch longer bolt with my splash guards and need to confirm the metric / size (I don't trust my micrometer skills -- and I do not have metric tap/dye to confirm)
Could you provide the HB1 callout details (the bolt for underside fender flare mount)
I need ~0.25 inch longer bolt with my splash guards and need to confirm the metric / size (I don't trust my micrometer skills -- and I do not have metric tap/dye to confirm)
#27
I have installed factory flares on my 09. I put them on in 2010. I only used 2 sided tape. High quality tape. They are still on there after nearly 8 years. harsh winters and hundreds of car washes of every kind. No problems they look as good as the day I put them on
The following 2 users liked this post by Bluetoy:
ed1le (01-30-2018),
TopOMichXL (09-03-2019)
#29
Senior Member
W790215-S900 - blue clips*
W717736-S300 - white clips
* The OEM clips on my flare were white, but these look the exact same.
#30
W790383-S900 - yellow clip
W790215-S900 - blue clips*
W717736-S300 - white clips
* The OEM clips on my flare were white, but these look the exact same.
W790215-S900 - blue clips*
W717736-S300 - white clips
* The OEM clips on my flare were white, but these look the exact same.