Factory Fender Flare Hardware
#2
One Clean Machine
iTrader: (5)
Local ford dealer, or a ford dealer on ebay! Dont know the part #'s, your looking for sorry. I assume you mean the Clips, that pop into the flares/fenders?
The following users liked this post:
clh850 (11-16-2016)
#3
Thanks for the reply. Yes, the clips and a couple bolts for each flare, I purchased as set or flares off of Ebay but I'm having a hard time sourcing the hardware. I've read in an older thread that Ford doesn't offer a hardware kit separately but I was hoping that someone had found a vendor that offers them.
#4
One Clean Machine
iTrader: (5)
I would think, if you walk into a Ford Dealer Parts Department. The Parts guy, can pull up a Exploded View, on his P.C., and order the Clips, bolts, and push pins that youll need.
#5
I've asked this question before. Answer is no, you cannot source just the hardware. You have to buy new flares that come with the hardware. I think it was Steve that told me on a thread. I broke the white clip on my buddies ruby red f150 while removing the OEM fender flare
#6
I've asked this question before. Answer is no, you cannot source just the hardware. You have to buy new flares that come with the hardware. I think it was Steve that told me on a thread. I broke the white clip on my buddies ruby red f150 while removing the OEM fender flare
Trending Topics
#8
Since I'll only be drilling holes on the underside of my fender, I wonder how well aluminum rivets would hold up. That way I don't have to worry about sourcing these stupid clips and no corrosion. Any thoughts?
#10
Senior Member
iTrader: (14)
Just use 3M vhb tape. I have been running mine with it for a year and they are not coming off.
Stick the tape in the lip, you can see it next to the sticker. Use this
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Last edited by TexasFording; 11-16-2016 at 05:09 PM.