Door Ajar Message
The rear passenger door ajar message randomly pops up on the dash while driving. What is a suggested fix for cheapest amount if I know the door is shut? I was thinking of just using a jumper in the connecter. Thoughts?
happened to me several times. the l/r door was not closed right.
I have a Bluetooth OBD2 connecter coming next week. I did jumper the latch sensor to see if it was the sensor or a broken wire, with 2 days of driving, no door ajar message. Leading me to believe it is the door latch sensor that is bad.
hello need help please
had same problem for couple of months. i changed the door lock with OEM one but still the same the sensor wasn`t bad i checked the all the wires door connecting wire and the wires to the bcm is okay, i think the problem is with the bcm. So how can i configure the bcm on forscan is ir possible to change the opening circuit code to closed?
had same problem for couple of months. i changed the door lock with OEM one but still the same the sensor wasn`t bad i checked the all the wires door connecting wire and the wires to the bcm is okay, i think the problem is with the bcm. So how can i configure the bcm on forscan is ir possible to change the opening circuit code to closed?
had same problem for couple of months. i changed the door lock with OEM one but still the same the sensor wasn`t bad i checked the all the wires door connecting wire and the wires to the bcm is okay, i think the problem is with the bcm. So how can i configure the bcm on forscan is ir possible to change the opening circuit code to closed?
Trending Topics
please help
had same problem for couple of months. i changed the door lock with OEM one but still the same the sensor wasn`t bad i checked the all the wires door connecting wire and the wires to the bcm is okay, i think the problem is with the bcm. So how can i configure the bcm on forscan is ir possible to change the opening circuit code to closed?
had same problem for couple of months. i changed the door lock with OEM one but still the same the sensor wasn`t bad i checked the all the wires door connecting wire and the wires to the bcm is okay, i think the problem is with the bcm. So how can i configure the bcm on forscan is ir possible to change the opening circuit code to closed?
Supercab (Rear half doors) or SuperCrew (Full rear doors)? I used to get the rear door ajar warning on my Supercab. I just had to close it a bit firmer. It used to jar loose on rough roads, since there is no support pillar for it to close against.











