Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Display Cluster Upgrade

Thread Tools
 
Search this Thread
 
Old May 6, 2025 | 02:32 PM
  #1  
dalexritch's Avatar
Thread Starter
Junior Member
 
Joined: May 2025
Posts: 11
Likes: 1
Default Display Cluster Upgrade

Hi all,

Hoping to upgrade my 2 inch 2017 xlt 3.5na cluster to a 4 or 8 inch cluster. As far as I know so far, one can replace their 2015-2020 cluster with a 8 inch lariat cluster (from 2019-2020(?)), and use FORscan to update the IPC, but milage can only be increased, so the cluster you buy has to be lower milage then your truck(?). My plan as of now is to try to find an 8 inch Lariat cluster at a salvage yard or eBay and do this myself. Has anyone done this? Apologies if theres already a thread on this, took a look but couldn't find one. Heres a video I found on it:
Reply
Old May 6, 2025 | 02:53 PM
  #2  
nhizzat's Avatar
Senior Member
Community Builder
Liked
Loved
Community Favorite
 
Joined: Jun 2021
Posts: 810
Likes: 587
Default

https://www.f150forum.com/f122/2015-...usters-400378/
Reply
Old May 7, 2025 | 09:41 AM
  #3  
dalexritch's Avatar
Thread Starter
Junior Member
 
Joined: May 2025
Posts: 11
Likes: 1
Default

Thanks, have seen these. Looks nice. Trying to avoid spending $700. If I can find one at a salvage yard for $150-250 will be set. $350 on eBay. Poor and on a budget...lol.
Reply
Old May 7, 2025 | 09:49 AM
  #4  
2008__XL's Avatar
Community Team
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2016
Posts: 8,970
Likes: 7,499
From: Vermont
Default

Originally Posted by dalexritch
Poor and on a budget...lol.
If I were in that position, not sure I’d be worrying about updating the cluster.
Reply
Old May 9, 2025 | 05:29 AM
  #5  
Fireman 4032's Avatar
Junior Member
Liked
 
Joined: Apr 2025
Posts: 9
Likes: 7
From: Northern NY
Default

Originally Posted by dalexritch
Thanks, have seen these. Looks nice. Trying to avoid spending $700. If I can find one at a salvage yard for $150-250 will be set. $350 on eBay. Poor and on a budget...lol.
I did it. I am happy with it. Granted, I only spent $530 (programmed and new cover) on mine. I have 3.5 with Nav, so the step-up from 4" to 8" was worth it for me, but IMO that $500 - $700 could be used towards a more useful mod or upgrade.
Reply
Old May 9, 2025 | 05:41 PM
  #6  
adamjt's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2017
Posts: 199
Likes: 46
Default

I have a 4in I need to sell. From a 2020 when it had around 500 miles
Reply
Old May 10, 2025 | 11:11 PM
  #7  
flyboy50sc's Avatar
Senior Member
Liked
Loved
Community Favorite
 
Joined: Apr 2023
Posts: 221
Likes: 91
From: SC
Default

I did the 4" to 8" conversion about 2 months ago, found a guy online that does the programming and put a new cover on the cluster. Cost me $599, and to me it was worth it. Not sure about the DIY route, but I'm sure its possible. It needs the VIN programmed, and the mileage thing is correct, the new cluster can only be programmed up, not backwards according to him. So a lower mileage cluster is a must.
Reply
Old May 10, 2025 | 11:38 PM
  #8  
l27's Avatar
l27
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2016
Posts: 513
Likes: 230
From: Katy, TX
Default

I just did it for the cost of the cluster. Found it on lkq for a couple hundred. Programming with forscan for free. Don't pay hundreds more unless you want it customized. Like you said, just find one with lower miles than you. The one I found has a couple thousand more than what I had. I didn't care so I left it. Just have to change my oil a little sooner to get back to my every 5k routine since my miles are now off!


Last edited by l27; May 10, 2025 at 11:43 PM.
Reply
Old May 17, 2025 | 01:20 AM
  #9  
flyboy50sc's Avatar
Senior Member
Liked
Loved
Community Favorite
 
Joined: Apr 2023
Posts: 221
Likes: 91
From: SC
Default

The true mileage is in one of the modules somewhere. Not sure which one, but Ford would be able to see it
Reply
Old Aug 13, 2025 | 01:42 PM
  #10  
Hiflier68's Avatar
Louder n Faster
 
Joined: Jul 2025
Posts: 13
Likes: 0
Default Cover

Where id you source the new cover?


Originally Posted by Fireman 4032
I did it. I am happy with it. Granted, I only spent $530 (programmed and new cover) on mine. I have 3.5 with Nav, so the step-up from 4" to 8" was worth it for me, but IMO that $500 - $700 could be used towards a more useful mod or upgrade.
Reply



All times are GMT -4. The time now is 09:49 PM.