Check engine light!
TSB 15-0171
FORD: 2015 F-150
ISSUE:
Some 2015 F-150 vehicles equipped with a 2.7L gasoline turbocharged direct injected (GTDI) engine and built on or before 10/5/2015 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
FORD: 2015 F-150
ISSUE:
Some 2015 F-150 vehicles equipped with a 2.7L gasoline turbocharged direct injected (GTDI) engine and built on or before 10/5/2015 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Connect the Ford Integrated Diagnostic System (IDS) service tool or equivalent to the data link connector (DLC). Is DTC P2450 the only DTC stored in powertrain control module (PCM)?
- Yes - proceed to Step 2.
- No - this article does not apply. Refer to Powertrain Control/Emission Diagnosis (PC/ED) manual for normal diagnosis.
- Replace the fuel tank mounted evaporative emission blocking valve. Refer to Workshop Manual (WSM), Section 303-13.
- The evaporative emission blocking valve is serviced with the fuel tank pressure sensor and tube.
Last edited by tmcolegr; Nov 15, 2015 at 05:26 AM.
TSB 15-0171
FORD: 2015 F-150
ISSUE:
Some 2015 F-150 vehicles equipped with a 2.7L gasoline turbocharged direct injected (GTDI) engine and built on or before 10/5/2015 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
FORD: 2015 F-150
ISSUE:
Some 2015 F-150 vehicles equipped with a 2.7L gasoline turbocharged direct injected (GTDI) engine and built on or before 10/5/2015 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Connect the Ford Integrated Diagnostic System (IDS) service tool or equivalent to the data link connector (DLC). Is DTC P2450 the only DTC stored in powertrain control module (PCM)?
- Yes - proceed to Step 2.
- No - this article does not apply. Refer to Powertrain Control/Emission Diagnosis (PC/ED) manual for normal diagnosis.
- Replace the fuel tank mounted evaporative emission blocking valve. Refer to Workshop Manual (WSM), Section 303-13.
- The evaporative emission blocking valve is serviced with the fuel tank pressure sensor and tube.









