Hi there, I change my digital cluster with another one from junkyard , when i run my truck the drive mode is not working what should i do to fix this problem

 

Is this on a 1977?

Welcome to the forum. You'll receive much better help if you include your full vehicle details for us.

 

. Thanks you, I have f150-XLT 2019 5.0

 

Did you upgrade to the larger screen from the higher trims or replaced with same model as yours? I believe you needed to download your AsBuilt data from your stock cluster and apply to the new cluster. I am not 100 percent on that.

Look in the massive cluster upgrades thread for more information.

https://www.f150forum.com/f118/gauge...5699/index205/

 

Did you upgrade to the larger screen from the higher trims or replaced with same model as yours? I believe you needed to download your AsBuilt data from your stock cluster and apply to the new cluster. I am not 100 percent on that.

yes I upgrade to the larger screen the cluster is for raptor 2018 my trims is XLT

 

The drive modes are different for the Raptors so the cluster won't work properly on an XLT.

 

. The cluster may need reprogramming (via FORScan or dealer tools) to match the XLT’s configuration.

 

That's if you bought one from a Lariat/Limited/Platinum/King Ranch. Raptor won't work properly because of the firmware on it.

You'll need to sell or return that Raptor cluster and buy one from one of the other higher trims for years 2018-2020