Maybe a strange question but let see.

I know there is a plastic kit that you can install at the bottom of the console to create divisions and make it less of a mess.
Anybody done that out of wood?
I'm looking for a template for a 2015 XLT.

I know I could buy the plastic version but I have plywood in the garage and it could be a fun "simple" project.

Cheers

 

Look here.

https://www.f150forum.com/f118/cente...458364/index3/

GD

 

It's interesting. He got a bit creative and save the hassles of fitting the bottom by adding a "floor".

 

Yeah, it was fairly easy. The only pain is that the bottom is larger than the hole to fit the piece in...so I had to bevel the front and back (I think it was 45-degrees, on the bottom) for a tight fit, then the vertical walls had to be taper or else it wouldn't fit. I used hard maple and Titebond III then sealed it. TBIII is the strongest wood glue I've ever used and it's plenty strong without fasteners to hold it.

To do just a divider like you're talking about you can just run a couple Dados half-height and slide them in...I wanted to be able to slide my clipboards so I really only had that option to keep it under the factory tray without drilling. Another benefit to having the base is that I can add anything else I want without modifying the console.

 

https://www.f150forum.com/f118/cente...ivider-303431/

Here's a link that includes a template. I posted it under a different user name a few years ago.