How do i get this little bugger out?

 

posted to the wrong forum.. Shouldn't be in the 2015+.
Its a 13.. Posted from my phone.

 

Bugs have lots of predators in the animal kingdom. Get one and put it behind your dash too.

 

You need a software patch to fix that bug.

(Sorry, couldn't help myself.)

 

Buggin you?

 

that would drive me nuts, You will probably have to pull the gauge cluster out and separate it to get him out.

 

^^^ This. If you're lucky the clear lens is screwed to the cluster assembly, not sonic welded.

 

^^ This. If you're lucky the clear lens is screwed to the cluster assembly, not sonic welded.



It is screwed on a 2014. I had to replace the lens on my previous truck as apparently the owner before me used 60 grit sandpaper to clean it. Several you tube videos on how to replace. Takes maybe 15 minutes.

 

Exact same thing in my 2012. I popped the whole cluster assembly out, and there are little drain/breathing holes between the lens and the assembly on each side. Just take an air compressor/can of air and blow through one hole, bug will fly out the other lol dont even have to take off the lens

 

Well I dunna-no, looks like a 2017 bug to me.