Just got it... it doesn't seem it covers the bed entirely. Seems there is a lot of play around the wheel well and then depending on which way you slide it, there's about 1-2" of space in the front or near the tailgate where it's not covered.
Is everyone's this way?

Secondly, I'm thinking about not attaching the bedrug on the bed since I'll have a mx4 over the top. Anyone do this?

Obviously, I'll have to attach the mat on the tailgate.

 

I'm about to install my BedRug Mat. I just finished installing my new BakFlip F1 and wanted to wait to install this after I got it installed. I have a Line-X spray in liner, and was thinking NOT to install using the double sided tape. Ill report back with what I discover in a lil while. Do you have any pics you could share? Ill take some as well. My bed size is 5.5ft bed.

 

I just took mine back out as I have to wait on new rails for my mx4.... I'll take some pictures once I get those and I've put it back in.

 

New rails????

 

they were bent

rails being for the mx4 cover.

 

Wow, that sucks.

 

I noticed slight gaps but not more than about a 1/4" around the bulk head and fender wells...at the tailgate it's closer to 3/4" on mine

 

I have a Line-X spray-in liner and I would like to install a BedRed as well. Did the BedRug come with any recommendations for installation over a spray-in liner? I'm very interested in how it works out for you.

 

I used a horse stall mat over my sprayed-in liner. 4x6. Easily cut for my 5.5' box. About 1/2" thick. Flexible rubber. Non slip. $30. Available at farm supply stores.

 

Thanks Lowlander, but I'm specifically interested in the BedRug - both the fit as the OP questioned, as well as installing over a Line-X spray-in. I'm sure your solution is good as well.

Sorry Centex, I don't mean to hijack your thread.