New here hope this is correct. Just traded my 2013 stx supercab truck with 6'5" bed for a 2015 xlt supercab with 6'5" bed. My question is will the access vanish tonneau cover from 2013 fit on my 2015? It's a roll up vinyl that attaches to bed rails with a metal L channel and clamps channel has Velcro fastener to seal vinyl cover which has Velcro as well. Have looked on there site and there are different stock numbers for each year. Any help would be appreciated

 

You could call the company...

From what I have read, SOME covers can be positioned to sort of fit.

 

Access is on this forum. Shoot them a pm and ask. If the part numbers are different between the two years I would think it wouldn't work but it's worth the call/pm.

 

I put the Roll N Lock from my 2010 Lariat on my 2015 XLT, it fit like a glove. I measured the beds before I traded, the length and width were the same.

 

^^ Same here my XTang Trifecta from my 2010 STX SuperCab fit directly on my 2015 and doesn't leak just like on the 2010

 

We have different part numbers for the different model years because the bed dimensions change between 04-14 and 2015-ON trucks. We recommend ordering a new cover for your new truck.

 

Strange, I had a 2011 previous to my 2015. The box on my 2015 is about 3/8" more narrow in comparison to my 2011. Could not get my retrax in the box properly.

 

I don`t know but my RnL fit fine, maybe the rails on the Retrax fit inside the bedrails differently.

 

As you can see in my picture in the post above of my truck with a 2010 tonneau the above rail tonneau's fit fine. See the pic or link below from the American Muscle site - every tonneau on the page is listed as '09-'16 or '09-'15


http://www.americanmuscle.com/f150-t...vers-2015.html