Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Backup Sensor Shorting

Thread Tools
 
Search this Thread
 
Old Aug 3, 2023 | 10:57 PM
  #1  
Dasher's Avatar
Thread Starter
Junior Member
 
Joined: May 2023
Posts: 1
Likes: 0
Default Backup Sensor Shorting

So I have a 2018 Lariat with the 502A package,adaptive cruise, etc. and on slightly rainy days like today, one of my reverse sensors goes off continuously on reverse. I am assuming this is a short in the sensor itself, especially since it goes away when the truck drys out some. Anyone else had this problem? If I buy a replacement sensor from Amazon or a local auto store will I need to recalibrate anything or should it be plug and play?
Reply
Old Aug 4, 2023 | 12:23 AM
  #2  
adamjt's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2017
Posts: 198
Likes: 46
Default

Mine do the same. Specifically one. Try some dielectric grease in the connector. Mines also much better when I park in rhe garage.
Reply
Old Aug 4, 2023 | 05:46 AM
  #3  
Mulestang's Avatar
5 Year Member
10 Year Member
 
Joined: Jun 2014
Posts: 1,300
Likes: 145
From: Jacksonville, FL
Default

My right one did the exact same thing. Got a replacement from Ford and swapped it myself. 10 minute job, plug and play. No calibration required. I will say I got mine straight from my local dealer because I didn't want to risk getting a counterfeit part. Plus, it wasn't unreasonably more expensive.
Reply
Old Aug 4, 2023 | 05:59 AM
  #4  
techrep's Avatar
Senior Member
15 Year Member
Veteran: Navy
iTrader: (1)
 
Joined: Jan 2009
Posts: 37,815
Likes: 2,714
From: Va. Beach, VA.
Default

Originally Posted by adamjt
Mine do the same. Specifically one. Try some dielectric grease in the connector. Mines also much better when I park in rhe garage.
You may not wanna put dielectric grease directly in the connector, it should go around the outside of the male plug to seal out moisture. Dielectric grease is a non conductive grease, not good in the connector itself.
Reply
Old Aug 4, 2023 | 07:02 AM
  #5  
adamjt's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2017
Posts: 198
Likes: 46
Default

Originally Posted by Mulestang
My right one did the exact same thing. Got a replacement from Ford and swapped it myself. 10 minute job, plug and play. No calibration required. I will say I got mine straight from my local dealer because I didn't want to risk getting a counterfeit part. Plus, it wasn't unreasonably more expensive.
Good to know. I thought you had to calibrate these. My middle left one is rhe one that drives me nuts a couple times a week.
Reply
Old Aug 4, 2023 | 02:55 PM
  #6  
Mulestang's Avatar
5 Year Member
10 Year Member
 
Joined: Jun 2014
Posts: 1,300
Likes: 145
From: Jacksonville, FL
Default

I don't know if the sensors are lower quality in these newer trucks. I never had one fail in my 08. I'm about to change #3 on my '19.
Reply
Old Aug 4, 2023 | 04:48 PM
  #7  
adamjt's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2017
Posts: 198
Likes: 46
Default

Mine is a 2020
Reply




All times are GMT -4. The time now is 01:30 PM.