Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by:

AutoTec 14.4" T-Style screen

Thread Tools
 
Search this Thread
 
Old 06-02-2023, 12:18 PM
  #501  
Junior Member
 
BuckeyeSuperDuty's Avatar
 
Join Date: Jun 2023
Posts: 6
Received 1 Like on 1 Post
Default

Originally Posted by rjinaz
To clarify his point, you must use the Aux input for any additional camera. The unit comes with a connection for a backup camera, but it gets disabled when your truck has a factory backup cam or 360 cam system.
Just to be sure I'm understanding, the Aux input is the one from Sync3, right?
Old 06-02-2023, 12:21 PM
  #502  
Hacker

Thread Starter
 
rjinaz's Avatar
 
Join Date: Jun 2021
Location: Arizona
Posts: 741
Received 623 Likes on 324 Posts
Default

Originally Posted by BuckeyeSuperDuty
Just to be sure I'm understanding, the Aux input is the one from Sync3, right?
No... the new head unit has it's own Aux camera input.
You can use that while in motion.
Old 06-02-2023, 12:27 PM
  #503  
Junior Member
 
BuckeyeSuperDuty's Avatar
 
Join Date: Jun 2023
Posts: 6
Received 1 Like on 1 Post
Default

Originally Posted by rjinaz
No... the new head unit has it's own Aux camera input.
You can use that while in motion.
OK, that might be a better option. I like the factory camera for the 12 pin connection for both the camera and TPMS. Maybe I can figure out a way to make that work. Between the 7 pin, 12 pin, DC-DC, and air, might start getting cluttered with another plug for a different camera.

Last edited by BuckeyeSuperDuty; 06-02-2023 at 12:32 PM.
Old 06-02-2023, 01:12 PM
  #504  
Senior Member
 
2016Limited's Avatar
 
Join Date: Jan 2018
Location: TEXAS
Posts: 599
Received 235 Likes on 147 Posts

Default

Originally Posted by BuckeyeSuperDuty
OK, that might be a better option. I like the factory camera for the 12 pin connection for both the camera and TPMS. Maybe I can figure out a way to make that work. Between the 7 pin, 12 pin, DC-DC, and air, might start getting cluttered with another plug for a different camera.
The factory connector for the 12 pin camera and TPMS jack is under your spare tire under the bed. You could de-pin that connector and tap into pin 8 (shield/ground) pin 9 (video out +) and pin 10 (Video out -). Then run new custom RCA yellow wire up to your head unit. There is a floor grommet under your running boards that leads up into the driver's door step panel and then you can run along the driver kick panel, up into the dash behind the headlights and behind the radio. Would be a slick custom install. Just test those pins to your new Android before you run the cable! More info here: https://www.ford-trucks.com/forums/1...diagram-2.html








The following 2 users liked this post by 2016Limited:
BuckeyeSuperDuty (06-02-2023), Markcash1964 (06-25-2023)
Old 06-03-2023, 01:03 PM
  #505  
Member
 
STXRaptor's Avatar
 
Join Date: Apr 2023
Posts: 45
Received 11 Likes on 8 Posts
Default

Originally Posted by BuckeyeSuperDuty



Another big thing I'd want is to be able to split screen Google Maps and SiriusXM. I haven't seen the ability to do that, but wondering if someone has figured that out.
You can definitely do this. I launch Maps first then press and hold bottom right Squarish icon allowing you to put Maps at top of screen then choose the secondary app for bottom. - just note that for me the “cam” app also displays the Sync 3 display which I use for Sirius/FM radio. You could also download the SiriysXM app since you probably get it for free w your subscription.
Old 06-03-2023, 01:16 PM
  #506  
Member
 
nikhsub1's Avatar
 
Join Date: Mar 2023
Posts: 30
Likes: 0
Received 16 Likes on 8 Posts
Default

Unless he means split screening the console app (sync 3) and google maps... this is not possible as you can't split the console app as far as I can tell.
Old 06-03-2023, 03:00 PM
  #507  
Hacker

Thread Starter
 
rjinaz's Avatar
 
Join Date: Jun 2021
Location: Arizona
Posts: 741
Received 623 Likes on 324 Posts
Default

Originally Posted by nikhsub1
Unless he means split screening the console app (sync 3) and google maps... this is not possible as you can't split the console app as far as I can tell.
You can split it.
I just did a 200 mile drive with Google maps up top and console in the bottom. It only showed the SYNC portion. The buttons were not visible.
Looks pretty slick that way.
Old 06-03-2023, 03:18 PM
  #508  
Member
 
Windriver's Avatar
 
Join Date: Aug 2018
Posts: 83
Received 26 Likes on 18 Posts

Default

Originally Posted by BuckeyeSuperDuty
Nice looking rigs. Here's ours.



Limitless Autoworks has a Camera-On-Demand kit for the Super Duty that I was planning to use. I was hoping this unit took care of that because it isn't cheap. I may end up still going with that.

I preferred the factory trailer TPMS on the Ram, so I'll likely stick with the Ford version. Just not a fan of mounting things on the dash if I can avoid it.

Will look into other camera options. Our trailer is prepped for a backup camera, so I'd like to mount it there, but would require some additional wiring if we don't use something wireless.

We typically listen to SiriusXM, especially when we're out west. It's not a deal breaker, as we can't currently have maps and SiriusXM up on the factory unit.
Here is a new idea i have for travel trailer backup camera, what do you guys think of this and will it work. Thinking of putting one of these https://a.co/d/9ecEnXo on inside on the back window of TT and then connect it to TT wifi system. Then install camera app on head unit and connect head unit to TT wifi system. I then should be able to have TT backup camera on while driving. Then figure out what wire triggers the truck backup camera and install a switch on it to disable it while TT is connected. Will this work, would be easy and no wires. Also will use phone hotspot to connect TT wifi to internet.
Old 06-03-2023, 03:23 PM
  #509  
Member
 
Windriver's Avatar
 
Join Date: Aug 2018
Posts: 83
Received 26 Likes on 18 Posts

Default

Originally Posted by Windriver
Here is a new idea i have for travel trailer backup camera, what do you guys think of this and will it work. Thinking of putting one of these https://a.co/d/9ecEnXo on inside on the back window of TT and then connect it to TT wifi system. Then install camera app on head unit and connect head unit to TT wifi system. I then should be able to have TT backup camera on while driving. Then figure out what wire triggers the truck backup camera and install a switch on it to disable it while TT is connected. Will this work, would be easy and no wires. Also will use phone hotspot to connect TT wifi to internet.
Reason for disabling truck back up camera is so when backing up TT, tail gate camera doesn't take over
Old 06-04-2023, 02:47 AM
  #510  
tww
Member
 
tww's Avatar
 
Join Date: Apr 2020
Location: Southeast USA
Posts: 33
Received 15 Likes on 8 Posts
Default

Originally Posted by rjinaz
You can split it.
I just did a 200 mile drive with Google maps up top and console in the bottom. It only showed the SYNC portion. The buttons were not visible.
Looks pretty slick that way.
I agree. I've recently been using Tom Tom at the top and the console at the bottom. It does look pretty slick. By the way, I like Tom Tom because you can download the offline maps for when you don't have cell service.
The following users liked this post:
rjinaz (06-04-2023)


Quick Reply: AutoTec 14.4" T-Style screen



All times are GMT -4. The time now is 12:31 PM.