Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by:

Anyone with paint issues??

Thread Tools
 
Search this Thread
 
Old 11-25-2016, 11:53 PM
  #1  
Junior Member
Thread Starter
 
Glock150's Avatar
 
Join Date: Nov 2016
Location: Gwinnett County, GA
Posts: 17
Likes: 0
Received 2 Likes on 1 Post
Default Anyone with paint issues??

Bought a 2016 F150 in October (Metallic) - washed the wheels on Thursday and noticed the paint is chipping off the right rear fender lip. Possibly a rock chip, right? Except I have no scratches or dings anywhere on the truck and it's a very uniform flaw. There are paint "fibers" (so to speak) hanging off the edges. Also, it's on the front side of the fender so I'd have had to been going about 40 in reverse for it to be a rock chip. I'm going to make the dealership document it. If it gets worse, that's on Ford, not me. I'm going to the dealership tomorrow but a friend of mine already said "good luck with that."


This is my 4th F150, but if the paint is going to peel off before it has 2k on the odometer, my next truck won't be a Ford.


I almost bought a Tundra but decided to stick with Ford instead. That won't happen in the future if this is what I can expect from **** poor union laborers.
Old 11-25-2016, 11:55 PM
  #2  
Senior Member
 
HughMungus's Avatar
 
Join Date: Oct 2016
Posts: 149
Received 15 Likes on 12 Posts
Default

My 2016 F150 Platinum arrived with dealer installed paint swirls and rock chips.
Old 11-26-2016, 12:02 AM
  #3  
Junior Member
Thread Starter
 
Glock150's Avatar
 
Join Date: Nov 2016
Location: Gwinnett County, GA
Posts: 17
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by HughMungus
My 2016 F150 Platinum arrived with dealer installed paint swirls and rock chips.


Sounds about right. Mine was fine until I handed it off to the dealership for the bed liner install and initial detail they didn't do before I drove it off the lot.


Now I have a rattle in my p/s door, a bubble in the front p/s window tint, and paint flaking off.
Old 11-26-2016, 12:53 AM
  #4  
Fake Ballin for da Gram
iTrader: (12)
 
white_dc's Avatar
 
Join Date: Jun 2011
Location: NE Florida
Posts: 3,017
Received 434 Likes on 366 Posts

Default

Originally Posted by Glock150
Sounds about right. Mine was fine until I handed it off to the dealership for the bed liner install and initial detail they didn't do before I drove it off the lot.


Now I have a rattle in my p/s door, a bubble in the front p/s window tint, and paint flaking off.
Originally Posted by HughMungus
My 2016 F150 Platinum arrived with dealer installed paint swirls and rock chips.
Dont forget the factory Ford orange peel in the paint.
Old 11-26-2016, 11:48 AM
  #5  
Junior Member
 
notrecat's Avatar
 
Join Date: Nov 2016
Location: Westfield Massachusetts
Posts: 17
Received 3 Likes on 2 Posts

Default

I have several rock chips that happened within the first 1000 miles. I noticed that static cling on theses trucks in unreal as well. On the other hand I had a mishap with a falling limb during a storm while I was driving under the tree. I cut hard but it hit the passenger front fender hard and didn't leave a scratch let alone a dent, go figure.
Old 11-26-2016, 12:59 PM
  #6  
Automotive Refinish Tech
iTrader: (1)
 
21RRF150's Avatar
 
Join Date: Aug 2011
Posts: 7,969
Received 1,747 Likes on 1,135 Posts

Default

Post pics.


I was a warranty painter for Ford for 6 years. I can tell you, if they'll tell you to pound sand or not
The following users liked this post:
tdog02 (11-27-2016)
Old 11-27-2016, 08:25 AM
  #7  
Member
 
mikead150's Avatar
 
Join Date: Mar 2012
Location: WV
Posts: 95
Received 2 Likes on 2 Posts

Default

I have a piece of paint off the fender lip, it was like a piece of foam was there and when I cleaned it off just a bare spot about 1/4 in wide. I did touch it up. Other than that a few dust particles on the roof. Also paint missing on the side of seam sealer where you can see behind the windshield. Rest of the body appears ok, several rock trips.
Old 11-27-2016, 01:44 PM
  #8  
Senior Member
 
HacksawMark's Avatar
 
Join Date: Jul 2016
Location: Pacific NW
Posts: 817
Received 239 Likes on 141 Posts

Default

The following users liked this post:
wildcat333 (11-27-2016)
Old 11-28-2016, 09:39 AM
  #9  
Junior Member
Thread Starter
 
Glock150's Avatar
 
Join Date: Nov 2016
Location: Gwinnett County, GA
Posts: 17
Likes: 0
Received 2 Likes on 1 Post
Default

I've got pics on my computer at home. Will post this evening.
Old 11-28-2016, 10:17 PM
  #10  
Junior Member
Thread Starter
 
Glock150's Avatar
 
Join Date: Nov 2016
Location: Gwinnett County, GA
Posts: 17
Likes: 0
Received 2 Likes on 1 Post
Default

It doesn't look all that bad on camera, but it's about 2cm top to bottom. Point is I didn't pay 50k for a truck for the paint to flake.






All times are GMT -4. The time now is 04:26 AM.