My passenger side of screw fx4 is about 1/8" lower than the rear door. All gaps are good however the door is lower. I have seen diagram to move bottom/top of door in/out. However I have not seen a diagram on where to be able to adjust door height alone without having to readjust the rest of gaps/in/out lines. Any info or diagram to help with this would be greatly appreciated. Thanks in advance

 

My truck has the same issue. I was going to see if I could get the dealer to adjust at first oil change. I'm only at 2100 though so it will be a while. I can't find anything else I don't love about this truck so far though so that's good

 

You guys see this thread? -> https://www.f150forum.com/f118/check...346055/index2/

Check out posts 3 & 5.

 

Cant speak for the OP but Yes I've seen that thanks. I haven't gotten into it too much as I hope to have the dealer handle it lol. My problem is a little different than the thread you pasted.
If I read the OP right his is the same. My passenger side rear door is actually lower than the front by an 1/8 inch. Perfectly flush to the surfaces but the entire door is Lower causing the trim and windows to not line up.