When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It can be done, I've converted my XLT to Push Button Start. Unless you have access to IDS, don't waste your time. As part of the conversion, you need to swap BCMs, which will require you to program new keys and do a parameter reset. Both of those are beyond Forscan's capabilities right now.
What are the steps to push button start OEM conversion
I'm pretty handy at adding options to my Ford trucks. I've built five of them in the last 7 years. I'm working on a 2021 F350 XL that's been massively converted to so far a Lariat value package plus added LED OEM light package, and BLISS, NAV APIM, etc., etc. I have most of the parts for adaptive cruise and a few other modules and the like on my project desk. ANYWAY... I think I want to convert to proximity key. I had it on my last truck and didn't think I'd miss it on this one.... but I do. I realize I'll have to change the steering column, BCM, and many other parts but I'm ok with this. I already have changed over the front door handles, but need the advanced wiring harnesses for each door. I already have the 502 dashboard harness too.
My question is, would you be interested in some remote consultation to assist me in getting this going? I'd pay a reasonable fee if we agree on in advance.
I have been searching for a BCM paired with two fobs from a wrecked lariat or above 2020-2021 F350 but it seems no wrecking yards want to pull these out.
Thanks in advance!
Justin. 623.213.2121
Originally Posted by Ryan B
It can be done, I've converted my XLT to Push Button Start. Unless you have access to IDS, don't waste your time. As part of the conversion, you need to swap BCMs, which will require you to program new keys and do a parameter reset. Both of those are beyond Forscan's capabilities right now.
I have successfully upgraded a few things on my 21 f150 stx which included push to start if anyone needing help just pm me I'll do what I can to help, I know it was hard finding out how to do it and if I can help someone not go through that I will, im no professional but I have learned alot throughout my upgrades. I dont get on here much but I am active on f150gen14 forums. Same username
Last edited by Pdyoung987; Feb 22, 2025 at 01:34 PM.
I'm searching for this for my '18 XLT as well. I found this on YouTube from Feb. of 2021. This place added Push to Start to a 2020 Roush F-150 that had a key to start w/ cylinder etc. They didn't give a lot of details, but at least it can be done.
Just some comment:
My18 XLT has remote start and will also start by >>momentary ignition switch operates to crank (and let off) <<<, it will start by itself, at that point.
All the right parts are already present, I would assume.
All that might be needed would be to wire a Button switch into the system.
I believe momentary starting has to be present for remote to work through the Transceiver located in the cab right rear headliner area.
All that takes is a double press on the Fob Button and it starts.
Good luck.
Last edited by Bluegrass; Apr 26, 2025 at 11:59 PM.
I'm searching for this for my '18 XLT as well. I found this on YouTube from Feb. of 2021. This place added Push to Start to a 2020 Roush F-150 that had a key to start w/ cylinder etc. They didn't give a lot of details, but at least it can be done.
I have successfully upgraded a few things on my 21 f150 stx which included push to start if anyone needing help just pm me I'll do what I can to help, I know it was hard finding out how to do it and if I can help someone not go through that I will, im no professional but I have learned alot throughout my upgrades. I dont get on here much but I am active on f150gen14 forums. Same username
Hi, how do I get in contact with you? I'm interested in this project. haha.
I have successfully upgraded a few things on my 21 f150 stx which included push to start if anyone needing help just pm me I'll do what I can to help, I know it was hard finding out how to do it and if I can help someone not go through that I will, im no professional but I have learned alot throughout my upgrades. I dont get on here much but I am active on f150gen14 forums. Same username
I can't DM you but would be interested to hear how you did it
Ahh. This is an aftermarket push to start. Has anyone heard of anyone swapping from a key ignition to a push to start using OEM parts? I know someone that totaled his (2020) lariat (I have a 2018 XLT) and before the insurance company comes for it, I was going to try to get some parts off it (push to start, heated rear seats, dual climate, etc.). I am just not sure what wires and modules to take.
I want to do this
