Adding auto climate to XLT.
11-28-2019, 01:25 AM
#122
Junior Member
Well... I knew that a few people would have wanted this fixed. I didn't think it would be this many so quickly.
I've got 16 people down for requesting a module with lucas8888 requesting two. Since there are a lot of requests, I'll give everybody on my list the early-adopter price (everybody that mentioned they wanted one on this thread prior to 11/28/19). It was going to be $30 a piece, but shipping logistics was going to be a nightmare using USPS First Class instead of Priority and I'd think everybody would want these in their hands sooner rather than later. With that said, it'll be $35 for one module (lucas8888 - I'll knock it down to $30 for the second since I can ship them in the same box).
Current timing is going to be dependent on if I can get the rest of the development done with protos that are going to be delivered on Friday. I will send PMs to each individual member when the development is complete. The rest of the development includes:
I've got 16 people down for requesting a module with lucas8888 requesting two. Since there are a lot of requests, I'll give everybody on my list the early-adopter price (everybody that mentioned they wanted one on this thread prior to 11/28/19). It was going to be $30 a piece, but shipping logistics was going to be a nightmare using USPS First Class instead of Priority and I'd think everybody would want these in their hands sooner rather than later. With that said, it'll be $35 for one module (lucas8888 - I'll knock it down to $30 for the second since I can ship them in the same box).
Current timing is going to be dependent on if I can get the rest of the development done with protos that are going to be delivered on Friday. I will send PMs to each individual member when the development is complete. The rest of the development includes:
- Verifying the modules can be reprogrammed for the instance I screw something up and don't catch it before mounting everything
- Verifying the comms-to-controls logic is all correct
- Verifying the seat temperature sensing is consistent
- Verifying the modules pull less than 25 µA when the vehicle is off (roughly 0.25 amp-years). I'd hate to kill everybody's batteries in the first couple months following installation.
The following 5 users liked this post by Fiasco17:
bhamilton (11-28-2019),
carrierj (11-28-2019),
Firerunner (11-28-2019),
JoeInPI (11-30-2019),
lucas8888 (11-28-2019)
11-28-2019, 07:36 AM
#123
Senior Member
iTrader: (1)
I ordered the boards on Thursday and I expect them around Thanksgiving. I will provide feedback once I populate the components and run basic functional testing off and on vehicle.
For people interested, I'll be starting a separate thread for another module I'm going to be working on for accessory control with a keyfob. I just bought a 1 mile Viper 2-way setup that has 4 auxiliary controls on it and I'm going to be working on a generic CAN module that can be pre-programmed to turn things on/off with input signals (i.e. turn on bed lights, full A/C, full heat, open windows, open sun roof, etc). I probably won't start that until Christmas since I want to get this one done first.
For people interested, I'll be starting a separate thread for another module I'm going to be working on for accessory control with a keyfob. I just bought a 1 mile Viper 2-way setup that has 4 auxiliary controls on it and I'm going to be working on a generic CAN module that can be pre-programmed to turn things on/off with input signals (i.e. turn on bed lights, full A/C, full heat, open windows, open sun roof, etc). I probably won't start that until Christmas since I want to get this one done first.
Count me in as a buyer!
11-28-2019, 10:06 AM
#124
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
Well... I knew that a few people would have wanted this fixed. I didn't think it would be this many so quickly.
I've got 16 people down for requesting a module with lucas8888 requesting two. Since there are a lot of requests, I'll give everybody on my list the early-adopter price (everybody that mentioned they wanted one on this thread prior to 11/28/19). It was going to be $30 a piece, but shipping logistics was going to be a nightmare using USPS First Class instead of Priority and I'd think everybody would want these in their hands sooner rather than later. With that said, it'll be $35 for one module (lucas8888 - I'll knock it down to $30 for the second since I can ship them in the same box).
Current timing is going to be dependent on if I can get the rest of the development done with protos that are going to be delivered on Friday. I will send PMs to each individual member when the development is complete. The rest of the development includes:
I've got 16 people down for requesting a module with lucas8888 requesting two. Since there are a lot of requests, I'll give everybody on my list the early-adopter price (everybody that mentioned they wanted one on this thread prior to 11/28/19). It was going to be $30 a piece, but shipping logistics was going to be a nightmare using USPS First Class instead of Priority and I'd think everybody would want these in their hands sooner rather than later. With that said, it'll be $35 for one module (lucas8888 - I'll knock it down to $30 for the second since I can ship them in the same box).
Current timing is going to be dependent on if I can get the rest of the development done with protos that are going to be delivered on Friday. I will send PMs to each individual member when the development is complete. The rest of the development includes:
- Verifying the modules can be reprogrammed for the instance I screw something up and don't catch it before mounting everything
- Verifying the comms-to-controls logic is all correct
- Verifying the seat temperature sensing is consistent
- Verifying the modules pull less than 25 µA when the vehicle is off (roughly 0.25 amp-years). I'd hate to kill everybody's batteries in the first couple months following installation.
The following users liked this post:
OCMike (11-28-2019)
11-28-2019, 11:01 AM
#125
Senior Member
I definitely want one of these also! I'm glad I didn't resell the bezel I bought a couple of years ago.
The following users liked this post:
Firerunner (11-28-2019)
11-28-2019, 01:29 PM
#126
Junior Member
The following users liked this post:
Firerunner (11-28-2019)
11-29-2019, 12:14 PM
#128
Senior Member
This is pretty exciting, not so much that I use the heated seats that much, but that its a "broken" part of my truck that i haven't been able to figure out for over a year. So glad we have a community to be part of that has a vast knowledge of many different fields. Now I may get re interested in digging in and trying to get the parking system working that I added to my XLT last year as well. Looking forward to ordering this from you!
The following users liked this post:
fourxfour (01-02-2020)
11-30-2019, 01:59 AM
#129
Senior Member
Well... I knew that a few people would have wanted this fixed. I didn't think it would be this many so quickly.
I've got 16 people down for requesting a module with lucas8888 requesting two. Since there are a lot of requests, I'll give everybody on my list the early-adopter price (everybody that mentioned they wanted one on this thread prior to 11/28/19). It was going to be $30 a piece, but shipping logistics was going to be a nightmare using USPS First Class instead of Priority and I'd think everybody would want these in their hands sooner rather than later. With that said, it'll be $35 for one module (lucas8888 - I'll knock it down to $30 for the second since I can ship them in the same box).
Current timing is going to be dependent on if I can get the rest of the development done with protos that are going to be delivered on Friday. I will send PMs to each individual member when the development is complete. The rest of the development includes:
I've got 16 people down for requesting a module with lucas8888 requesting two. Since there are a lot of requests, I'll give everybody on my list the early-adopter price (everybody that mentioned they wanted one on this thread prior to 11/28/19). It was going to be $30 a piece, but shipping logistics was going to be a nightmare using USPS First Class instead of Priority and I'd think everybody would want these in their hands sooner rather than later. With that said, it'll be $35 for one module (lucas8888 - I'll knock it down to $30 for the second since I can ship them in the same box).
Current timing is going to be dependent on if I can get the rest of the development done with protos that are going to be delivered on Friday. I will send PMs to each individual member when the development is complete. The rest of the development includes:
- Verifying the modules can be reprogrammed for the instance I screw something up and don't catch it before mounting everything
- Verifying the comms-to-controls logic is all correct
- Verifying the seat temperature sensing is consistent
- Verifying the modules pull less than 25 µA when the vehicle is off (roughly 0.25 amp-years). I'd hate to kill everybody's batteries in the first couple months following installation.
11-30-2019, 11:55 AM
#130
Junior Member
Quick update:
I unknowingly had them shipped to work, which I typically do because my delivery people are unreliable. This means I won’t get them until Monday. Just a slight delay on timing for the final development.
On another note, I rented a 2019 Mustang while I was out of town for work this past week and noticed that, when I’m in CarPlay or another non-climate screen, the temperature would temporarily show on the screen - like volume - when changed. It had Sync 3.3 software in it and I was wondering if anybody with an F150 XLT has seen this feature. I can confirm that it doesn’t appear on mine with 3.0 and I’m hoping there is an update out there or coming soon to fix it. I dislike having to leave CarPlay to look at what temperature I have it set to.
I unknowingly had them shipped to work, which I typically do because my delivery people are unreliable. This means I won’t get them until Monday. Just a slight delay on timing for the final development.
On another note, I rented a 2019 Mustang while I was out of town for work this past week and noticed that, when I’m in CarPlay or another non-climate screen, the temperature would temporarily show on the screen - like volume - when changed. It had Sync 3.3 software in it and I was wondering if anybody with an F150 XLT has seen this feature. I can confirm that it doesn’t appear on mine with 3.0 and I’m hoping there is an update out there or coming soon to fix it. I dislike having to leave CarPlay to look at what temperature I have it set to.
The following users liked this post:
Sledhead92 (11-30-2019)