2019 Sync issues
Senior Member
Joined: Apr 2018
Posts: 484
Likes: 97
From: EVERYWHERE
@artsr2002
For C1MCA platform, to fix that you can disable VSS Sleep, inside the BCM.
For CGEA 1.3 platform you can change camera controller parameter from LIN to CAN inside BCM Direct Config (asbuilt with Forscan). or from BCM to IPMB (some BCM have these values instead). If you have IPMB module, then the solution is disable VSS Sleep in there.
For C1MCA platform, to fix that you can disable VSS Sleep, inside the BCM.
For CGEA 1.3 platform you can change camera controller parameter from LIN to CAN inside BCM Direct Config (asbuilt with Forscan). or from BCM to IPMB (some BCM have these values instead). If you have IPMB module, then the solution is disable VSS Sleep in there.
Senior Member
Joined: Jul 2018
Posts: 14,629
Likes: 8,819
From: My House
@artsr2002
For C1MCA platform, to fix that you can disable VSS Sleep, inside the BCM.
For CGEA 1.3 platform you can change camera controller parameter from LIN to CAN inside BCM Direct Config (asbuilt with Forscan). or from BCM to IPMB (some BCM have these values instead). If you have IPMB module, then the solution is disable VSS Sleep in there.
For C1MCA platform, to fix that you can disable VSS Sleep, inside the BCM.
For CGEA 1.3 platform you can change camera controller parameter from LIN to CAN inside BCM Direct Config (asbuilt with Forscan). or from BCM to IPMB (some BCM have these values instead). If you have IPMB module, then the solution is disable VSS Sleep in there.