2017 3.5 ecoboost P0022
#11
Senior Member
Awesome! I'm hoping that'll be the same for me. Mine has been meticulously serviced and I was extremely disappointed when this rattle started. I've had the CEL on two occasions and just hasn't been convenient to get the code read. Usually 3-4 ignition cycles and it's gone. It'll certainly return because the noise is there on about half of the starts. Cold or hot it'll do it. Looking forward to hearing from you. Thanks again!!
The following users liked this post:
Purplfox81 (04-04-2020)
#12
Threw a P0022 code yesterday morning on my way to work. 2017 xlt fx4. Truck is running normal nothing out of the ordinary other than the check engine light on. Found plenty of info about the old 5.4s but nothing on the 3.5 ecoboost. Code reads intake camshaft position timing - over retarded (bank 2). Wondering if anyone else has had this issue and what rememdied it Thanks
#13
if you have anything to data log, you may see that it zeros out KR and OAL. Basically it puts the truck in limp mode until you turn it off. Ive had mine continue to do this after the repair but not enough to justify pulling the chains and phasers.