Noggin01

Installed my camera a few minutes ago. As others have said, the ATR fuse is the correct one.

Hanginten24

Excellent, good to know for further projects!

MStarmer

Just rec'd the one off amazon, don't know how anyone gets it to fit in spot 36, the fuses hit the edge of the box on my 2016. Used #35 but it doesn't turn on if I use my remote start for some reason and also threw a wrench code. The wrench icon could have been cause I turned on the ignition a few times with a few fuses pulled out when I was trying to get it to fit. So far doesn't seem to be a lot of room to fit the fuse tap in as I need one built opposite of what I purchased. Be nice if the fuses faced up and the pigtail came out to the right.

BOSSLJ15

I would like to fuse tap into my fuse box under the hood, for my raptor grill lights. I have been told to use fuse #105(power steering). What type of fuse is this?

Echo5iveDelta

Ok, everyone says tap #36, but that is a switched fuse. Do any of the interior fuses stay on. I thought I read somewhere that some shut off after about 20 minutes, I'm setting my dash cam so that it has power during "Park Mode" so I'm needing a constant on.

I'd rather not have to re-run power all over the place and run a direct line off the battery and through the firewall. Thanks.

jjslat

Bumping this thread, I'm also installing a dash cam that is wired into 2 fuses, 1 for constant power and 1 for switched.

I can't find a fuse in the interior kick panel fuse box that is always on, can someone share which fuse they found that worked for this?

2016 FX4x4

This is what I used http://www.ebay.com/itm/3-x-Micro2-B...9UVJUB&vxp=mtr

jjslat

Which fuse did you use for constant power?

2016 FX4x4

Sorry I didn't need constant hot. Fuse 3 is Driver Door Lock Motor that should be hot all the time.