ycastane

Yes the housing, maybe not the entire housing but partial!? I have to see if I can tinker with photoshop and come up with something.

Totemus

Still WIP. The retrofitter was addressing the issue with projector pivoting during aiming. I also asked him to boost led outlines and waiting on parts.

Totemus

I believe it's very doable for black housing. Painting chrome needs more preparation.

ycastane

That is looking sweeeeet!! I've thought about the same thing, making the outlines brighter and perhaps sequential

02fx4dude

You mean the issue with the way the Anzo projecor mount rotates the projector slightly when adjusting the up-down aim? Or he's making it pivot to give left-right adjustment for proper aim?

Totemus

Correct - cut off slightly inclines left or right when aiming the projector vertically, goes out of perfect horizontal line.

02fx4dude

I noticed that when I was doing my retro so I put in slightly curved slots to allow rotation adjustment of the projector to solve that issue. The downside is I have to get the height set pretty close to final, adjust rotation, then put the lenses back on. Can't adjust after it's all closed up. I'm sure a much better solution could be found or already has been but I didn't have the extra time to spend.

Totemus

He said that he "relocated a mounting ball joint which effectively shifts the pivot point of the projector during adjustment", whatever it means

ycastane

Totemus, how is the build coming along!?

Totemus

Pretty good, but mostly because it is somebody else who builds them for me

I was not successful in DYI retrofit attempt and ordered a professional retro-job.

He was busy boosting the LED outlines

On the picture top down stock 30% boost, boosted amber.