Totemus

This thread is dedicated to the ANZO headlights retrofit. At the time of the topic creation several forum members were in process or werre going to retrofit Anzo headlights so decided to share the progress and learnings on this topic. Feel free to post your experience or any useful information regarding 2015 and up headlights retrofit.

4B11TX

Great idea to start a new thread. I have Anzo switch backs, Morimoto D2S projectors, Morimoto 55w hid kit, Osram 66240cb 5500k d2s bulbs and Philips - Diamond Vision H7 halogen bulbs for the bottom projector on order. I bought spliters so I can run the top and bottom projector for high beams.

magnetic

For the longest time when I tried to take the signal lights out I was turning it the wrong way and thought I was going to break it. The arrow engraved beside the light is show which way it tightens ... not loosens. Now I have everything out and will be using a heat gun to split the head lights..

02fx4dude

Anzo's retrofitted with Mini D2S 3.0 - quad

Totemus

Awesome! Do you run low beams on both lower and upper projectors?

Totemus

I also plan to add clear lenses for parking lights:

http://klearz.com/products/ford/2015...dlight_markers

BrianH87

Are the Mini D2S projectors a direct swap for the Anzo projectors? No brackets or anything needed? I'm new to headlight retrofit world. Just wanted to make sure I order everything I need at once.

Totemus

Maybe 02fx can tell. I haven't opened mines yet.

Totemus

Oven vs heat gun - which is better to open the lights?

cwcb08

when i did my motorcycle i used the oven and then heat gun as needed