Jonm1911

I picked up a pair of Anzos since they were on sale. Pinged Vision Labs to see what an already retro'd pair would run. Depending on the price, I might cancel my order for the regular Anzos, just to save the time and frustration of doing the retro myself.

ReBeL50V8

Picked up a pair of anzos for black Friday, has any one blacked out the blinker and small marker lights? Also how did i see some eliminate their blinker all together.. And use just the switchback function on the anzo as the only blinker on the headlights

Casey Farr

Has anybody ordered from Vision Labs? I received a price quote but it seems kinda pricey. Are these prices good and how do the lights look in person? They said they would sell a set of non switchback Anzo's for $400 too.

Jonm1911

That's what I was quoted. I had already purchased my Anzos. I'm just going to retrofit them on my own.

hodown

Just retrofitted my ANZO projectors with G5-R bi-canons. The light output is 1,000 times better. Also PTM the housings and smoked the reflectors and blinker housings.

Bigcat1185

iTrader: (1)

OEM headlights with Morimoto projectors. 6500k bulbs. My windshield is covered with 55% ceramic tint also, these lights are BRIGHT.

joutlaw

I'm running some cheap HIDs in my Anzos and the output is ok. I get a lot of lens flare on the right side.

How did the G5's mount in the Anzo's?

I looked onthe lightwerkz site, but I can't tell if the G5s take D2S bulbs. I'd much rather run D2S OEM stuff than cheap HIDs off Amazon.

Delz

iTrader: (2)

Are there any members on here who can do a retrofit for the anzos ? I have tried all the websites and no one has gotten back to me.
Pm me

hodown

I got them from lightwerkz, I used D2S Bulbs philips bright whites I think. The housings took quite a bit of trimming to get the new projectors to fit. So i trimmed the stock plastic mount open and just mounted them to the anzo back plate. Just bolted to them. Made some small shims to get the alignment as perfect as i could.

2015rubyFX4

wow nice work, bigcat