2015 owners with the 40/20/40 bench...here's my upgrade
#121
Senior Member
Maybe I misunderstood you. Can you post a picture of what you are talking about?
What trim level do you have?
What trim level do you have?
#122
Member
#123
Senior Member
When I first looked I thought it was item 26 in the parts view, because it was shown only on the pass side. But now I see it is called out as the latch, with a left and right. It seems like it should be shown here. But I don't see it either. You may have to call them, or your dealer. I think all online dealers use the same views from the online catalog.
The following users liked this post:
Sharpienads (07-29-2017)
#127
Senior Member
Originally Posted by TBT
carrierj
On the cover assembly that you replaced, are there just clips holding it on and it looks like there are wired connections on the back. Am I looking at this correctly?
On the cover assembly that you replaced, are there just clips holding it on and it looks like there are wired connections on the back. Am I looking at this correctly?
#129
Senior Member
@NITRO-FC
The p/n number above for the cover assembly has openings for the pedal adjust switch & the E-park switch as shown below:
If you don't have the e-park switch, like me then the p/n will be different. I put in my VIN when I ordered, so Idk how I got the wrong part. But it was easily fixed by removing the gray one from my existing cover and plati-dip it black. Removed the two hole black one from the new part and glued my this one in place. It was pretty easy and it came out good. You may want to call them before you order if you don't have the e-park switch and save yourself some additional work. I could have exchanged it but didn't want to do that. Sorry for not mentioning it in the first post, but I had forgot about it.
The p/n number above for the cover assembly has openings for the pedal adjust switch & the E-park switch as shown below:
If you don't have the e-park switch, like me then the p/n will be different. I put in my VIN when I ordered, so Idk how I got the wrong part. But it was easily fixed by removing the gray one from my existing cover and plati-dip it black. Removed the two hole black one from the new part and glued my this one in place. It was pretty easy and it came out good. You may want to call them before you order if you don't have the e-park switch and save yourself some additional work. I could have exchanged it but didn't want to do that. Sorry for not mentioning it in the first post, but I had forgot about it.
#130
Senior Member