230748

Yeah the photos were good. I thought the same thing. I have some switchback anzos here i'll see if my H7 fit (I actually had NO H7 to test fit, I test fit a D2/D4 bulb and it fit, i just got some H7 back in stock though so I'll see how mine are)

It could be our bulbs with the variance... could be the Anzos... could be both lol. If I run into issues I'll let ya know what I found.

How are you guys keeping the sahvings from falling in? When I shaved down some 2014 projectors I didn't care, they were junked, but with the new anzos I have, I want to keep the shavings out, as do others? Best method you all found?

I thought about putting some tape inside, like in a ball, and then shaving it down a bit.

whirledpeaz

iTrader: (1)

Will the back flange of the project come off? There looks to be 3 screws. I'm going to take mine off if I can. Might be difficult getting the filings out.

mike5809

Thanks all! I am going to try and put something in there that will hopefully catch most of the metal shavings... we will see how well that goes.

I greatly appreciate all of the help and very prompt replies! I love this forum

4x4, let me know what you find out as well and how your install goes - I will be interested to see what happens.

2016ford

Finally recieved my Anzo's now waiting for the morimoto fogs. I'm thinking of going with morimoto hid for the lows and either their 2stroke leds or 4x4trucks XHP. I need to make a final decision and order them so I can get them installed

2016ford

A couple questions about ordering the lights. Do I need to get the Canbus Relay or just the regular relayer the HID system? Also for Morimotos LED for my hi beams will I need the anti flicker kit?

4B11TX

Regular relay harness with anti flicker capacitor for the hid's.

Totemus

HD relay with capacitor link works perfectly on my truck. But I've seen other using CANBUS. I called TRS when ordered mine and they confirmed HD relay + capacitor was the right setup for 2015+ F150.

TRS says you will need anti-flicker for Morimotos 2Strokers, but I run Putco without them. Not sure if you really need anti flicker.

2016ford

Okay thanks I'll be ordering in the morning probably. Was going to wait for the new leds from 4x4truck for projectors but can't wait to get the headlights in now that they are here!

TheX

There is a LOT of misinformation about HID's in this thread. Want some good info?

https://www.hidplanet.com/forums/for...uths-and-myths

Totemus

THanks for sharing. I'm always curious to learn. Can you bust couple of myths about HIDs for us, please?