Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by:

2.7 Knocking on Start Up

Thread Tools
 
Search this Thread
 
Old 03-07-2018, 07:49 AM
  #1  
Senior Member
Thread Starter
 
Ricklee4570's Avatar
 
Join Date: Apr 2017
Posts: 177
Likes: 0
Received 30 Likes on 18 Posts
Default 2.7 Knocking on Start Up

My 2017 2.7 Ecoboost has done this from day one. When starting the engine, whether it has sat for an hour or a week, doesn't matter, for about 1 to 2 seconds it makes a low knocking sound. Like the lifters are not pumped up from the oil yet. I can see this happening if it sat for a month, but it can literally sit for an hour and upon start up it does this then immediately goes away. Dealer says it is normal as it takes a second for the oil to circulate and it causes no damage.

My 3.5 never did this so I am not sure. Is this normal for the 2.7's?
Old 03-07-2018, 08:44 AM
  #2  
Senior Member
 
STeXy's Avatar
 
Join Date: Sep 2017
Posts: 675
Received 101 Likes on 82 Posts
Default

This is not a push rod engine with lifters, you have bigger problems if it is knocking. It is DOHC.
Old 03-07-2018, 12:10 PM
  #3  
Junior Member
 
raceman6's Avatar
 
Join Date: May 2017
Posts: 3
Likes: 0
Received 1 Like on 1 Post
Default

My 2017 2.7 started having a knocking/clacking sound after starting the engine a few hundred miles into it. I did some research on the Internet and found someone had a similar problem. They stated that sometimes the oil filter/gasket isn't tight from the factory. Since I don't change my own oil, I took it to a Ford quick lane and had them change the oil and filter. They couldn't understand why I would want it changed with only 1,200 miles on it at the time. I told them it was easier to try this solution than wait around for them to try and diagnose it. The bottom line is getting the oil and filter changed fixed the problem. It hasn't happened since.

Last edited by raceman6; 03-07-2018 at 12:15 PM.
The following users liked this post:
STeXy (03-07-2018)
Old 03-07-2018, 01:22 PM
  #4  
Senior Member
 
STeXy's Avatar
 
Join Date: Sep 2017
Posts: 675
Received 101 Likes on 82 Posts
Default

Glad to hear there was a simple solution to this. I just changed my oil, and I guess the filter O ring is doing its job.



Quick Reply: 2.7 Knocking on Start Up



All times are GMT -4. The time now is 04:05 AM.