157" Wheelbase with 6" ProComp lift ????
#11
Senior Member
Thread Starter
Originally Posted by aliass24
I would just shim it if there's a problem I think I paid $45 for the kit. Pm your number and Ill send you a picture of it installed.
#13
Senior Member
Thread Starter
Originally Posted by 13_F150
Can anyone post pictures of the 157" lifted. Ive only seen them leveled. But then again I'm not always on the forums
#14
I don't know if this helps but I have a 2014 with 157 inch wb on a 6 inch rough country lift. I definitely have a vibration, well axle wrap on take off. I am thinking the calvert racing traction bars might be my best bet. I also have a high speed shudder or vibration coming from the front end i haven’t found yet. Today I got the shop to put in some beads instead of wheel weights as I kept losing them. Still shudders at speed. Going to drop the carrier bearing 2 inches and put rear tires on front see if that does anything. Any help would be appreciated as well!
Last edited by RA101022; 01-12-2017 at 11:43 PM.
#15
Senior Member
Thread Starter
Originally Posted by Ktecoboost
I don't know if this helps but I have a 2014 with 157 inch wb on a 6 inch rough country lift. I definitely have a vibration, well axle wrap on take off. I am thinking the calvert racing traction bars might be my best bet. I also have a high speed shudder or vibration coming from the front end i havenÂ’t found yet. Today I got the shop to put in some beads instead of wheel weights as I kept losing them. Still shudders at speed. Going to drop the carrier bearing 2 inches and put rear tires on front see if that does anything. Any help would be appreciated as well!
#16
Senior Member
Thread Starter
So here it is! No vibrations at all and the ride is solid. Ride height and the Nitto Ridge Grapplers are smooth.
Night shot and the day photos will soon come!
Night shot and the day photos will soon come!
#18
Senior Member
Thread Starter
Originally Posted by white_dc
Had me all excited... Those pics are crappy!
I'll be checking back tomorrow to see some day pics.
I'll be checking back tomorrow to see some day pics.
#19
Gunner Retz
Join Date: Nov 2007
Location: The Republic of Bye God, TEXAS!
Posts: 255
Received 104 Likes
on
45 Posts
Here's mine, no vibration whatsoever on the ProComp 6" lift. They installed the carrier bearing shim at initial install, I can't understand why they wouldn't in the first place. Without it, they are throwing 2 unacceptable angles into your driveline. Go to another installer if they don't do it as a normal practice during install.
The following users liked this post:
gmcretz (01-21-2017)