When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
dmmedlin, here’s my 2wd with a 2.5” level in front, 1” lift shackles in the back, and 18” wheels with 275/65/18 tires. Perfect height for me now. Next step is a better performing/looking set of tires.
dmmedlin, here’s my 2wd with a 2.5” level in front, 1” lift shackles in the back, and 18” wheels with 275/65/18 tires. Perfect height for me now. Next step is a better performing/looking set of tires.
That's great! I'm looking at keeping my wheels and bumping up to 275 75r18s. I looked into doing the shackles. Would you do it again, or do a block? Also, what spacer did you use in the front?
I did motofab 2.5” pucks in the front. No difference in ride quality that I can tell. Shackles in the back were super easy. And you’re actually putting on shorter shackles so you don’t have to worry about extra sway or anything.
New to the forum, though figure this is a good thread to start with. This is my 19MY STX W1C. So far I've only taken off the decals, tinted the windows, and had the bed line-x'd.
I've posted my 2018 stx before but just did a 2/4 drop and figured I'd share for those looking for ideas. I'm in the process of redoing my front emblem because I didn't really like the way this one came out. Wheels up next also hopefully.
09-04-2019, 04:32 PM
