Hi Everyone,
I'm looking for a 12 volt switchable source for a blind spot detection system I'm installing. I tried a search and nothing came up.

The control module will be on the driver side under the dash.

Any suggestions would be helpful.

Thanks

 

Check your owner’s manual for an ignition sensitive fuse slot and use a fuse tap. Worked for me when I installed my dashcam.

 

I use a fuse tap on fuse #15 on my '19 XLT 302A for Morimoto DRL's. They operate normally now and don't hang on after the truck is shut off like they used to in fuse #35 or 37.