Turn indicator
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 2
Likes: 0
Turn indicator
My turn signals all work, its just when making a left turn the shaft from the steering wheel will not stay put, I have to hold it down.
It's not a huge concern, but it does get annoying. Anyone have any ideas on how this can be fixed?
It's not a huge concern, but it does get annoying. Anyone have any ideas on how this can be fixed?
Senior Member
Joined: Apr 2011
Posts: 176
Likes: 22
From: Arkansas
Turn signal switch
The turn signal switch in the steering column has a plastic "catch" that has broken. The switch assemblies are a PITA to change because you have to remove the steering wheel and dismantle a fair amount of the
column to get the plug fished through from the top.
If you have a non-tilt wheel it appears you may be able to just replace the plastic catch piece for about 1/2 the $. (Dorman P/N: 49304)
Our if you have a non-tilt wheel I have a brand new assembly I sell you for $22.00 including shipping. (I needed a tilt one and couldn't return)
Toddsss@aol.com
Todd Stranczek, Benton, AR
1991XLT 2WD 5.8
column to get the plug fished through from the top.
If you have a non-tilt wheel it appears you may be able to just replace the plastic catch piece for about 1/2 the $. (Dorman P/N: 49304)
Our if you have a non-tilt wheel I have a brand new assembly I sell you for $22.00 including shipping. (I needed a tilt one and couldn't return)
Toddsss@aol.com
Todd Stranczek, Benton, AR
1991XLT 2WD 5.8