turbo
what size turbo would u recommend for the 5.0
|
a t3 60-trim if your going single is what alot of 5.0 guys run
|
so a t5 is more than enough
|
whats the ar
|
110 its a 2.5 inlet
|
are you running it on a stock car?
and is it a TD04HL-15G |
mit be data plate fell off but its biger than a td-04
|
are you sure its a 1.10 a/r? cuz thats freaking huge, and if your stock your going to be screwed
|
yea it is im looking for pistons and a cam/lifter kit im not going to run much boost only bout 8 or 10 lbs im lookin for heads to
|
what type cam, and what pistions/rods are you using with what type of fuel considerations....stock compression or higher/lower....id do some research on forums like turbomustangs.com to check out other 5.0's and then other research to add on....always research before you jump into a project like this
anyways thats a realy high a/r, you may be able to get some decent power out of it however i dont realy know if its going to be in the rpm ranges that you want it to be...didnt look for a map |
All times are GMT -4. The time now is 03:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands