nosebleed

what size turbo would u recommend for the 5.0

blackbetty

a t3 60-trim if your going single is what alot of 5.0 guys run

nosebleed

so a t5 is more than enough

blackbetty

whats the ar

nosebleed

110 its a 2.5 inlet

blackbetty

are you running it on a stock car?

and is it a TD04HL-15G

nosebleed

mit be data plate fell off but its biger than a td-04

blackbetty

are you sure its a 1.10 a/r? cuz thats freaking huge, and if your stock your going to be screwed

nosebleed

yea it is im looking for pistons and a cam/lifter kit im not going to run much boost only bout 8 or 10 lbs im lookin for heads to

blackbetty

what type cam, and what pistions/rods are you using with what type of fuel considerations....stock compression or higher/lower....id do some research on forums like turbomustangs.com to check out other 5.0's and then other research to add on....always research before you jump into a project like this

anyways thats a realy high a/r, you may be able to get some decent power out of it however i dont realy know if its going to be in the rpm ranges that you want it to be...didnt look for a map