timing.. i think
Thread Starter
Junior Member
Joined: Aug 2013
Posts: 1
Likes: 0
timing.. i think
well, she's a 95 f150 4x4 xlt. Bored 40 over, trick flow cam and lifter set,trick flow springs and retainers. F.racing wires and accel coil. Cold air intake... Its got a rough idle cause of the cam but she has no power at all during acceleration. All electronic components are changed. How can you manually adjust the timing. The ecu always resets and I get no adjustment whatsoever. How can make this thing work... Where's the spout connector
Senior Member
Joined: Nov 2012
Posts: 1,532
Likes: 62
From: Anchorage Alaska
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Driver side firewall off the TFI Module (ICM)
Make sure the engine has been pre-warmed to norm of temp. 10BTDC is stock w/ SPOUT out. Probably don't want more than 14BTDC. Don't forget to replace the SPOUT plug after Base time check/ adjust.
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
https://www.f150forum.com/f10/how-re...es-obdi-10907/
Pull codes first. Than go from there.
Pull codes first. Than go from there.