A/T Fluid Cooler
Thread Starter
Member
Joined: Feb 2008
Posts: 43
Likes: 0
From: Torrance, CA
A/T Fluid Cooler
I am installing an A/T fluid cooler. It must be installed in series with the cooler in the radiator. The fluid is to come out of the radiator cooler and into the A/T cooler then return to the transmission.
Does anyone know for sure which line on the radiator is the return line to the transmission. Since the cooler is on the side instead of the bottom I'm assuming the bottom line is the return...but I don't know for sure.
Thanks
Does anyone know for sure which line on the radiator is the return line to the transmission. Since the cooler is on the side instead of the bottom I'm assuming the bottom line is the return...but I don't know for sure.
Thanks
Senior Member
Joined: Nov 2007
Posts: 184
Likes: 1
From: okeechobee, fla.
To be sure,you can have someone turn the engine over with the lines off,it will make a mess but you can catch most of the fluid with a plastic jug or something,just be fast on shutting the engine off if it starts,it will only take a second or two to see what line the fluid comes out of the trans,usually the front line on the trans flows to the radiator.