Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

no start

Thread Tools
 
Search this Thread
 
Old Sep 27, 2010 | 03:57 PM
  #11  
fordaillac's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 42
Likes: 0
From: Detroit
Default

i meant the red off the fuel pump relay.i see the red fuel pump relay wire goes to the eec,but were does the feed to the fuel pump come from.the red wire going to fuel pump has no power.
Reply
Old Sep 27, 2010 | 04:31 PM
  #12  
Just call me Sean's Avatar
We'd do it
Supporting Member

iTrader: (1)
 
Joined: May 2008
Posts: 35,602
Likes: 459
From: Orlando,Fl.
Default

Brown at the relay goes to the fuel pump, after it goes through the inertia switch and tank selector switch first.
Reply
Old Sep 29, 2010 | 01:08 AM
  #13  
fordaillac's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 42
Likes: 0
From: Detroit
Default

i will check it out after the rain lol
Reply
Old Oct 3, 2010 | 11:57 PM
  #14  
fordaillac's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 42
Likes: 0
From: Detroit
Default

lol no brown at the relay
Reply
Old Oct 4, 2010 | 12:33 AM
  #15  
Just call me Sean's Avatar
We'd do it
Supporting Member

iTrader: (1)
 
Joined: May 2008
Posts: 35,602
Likes: 459
From: Orlando,Fl.
Default

Must have been looking at the wrong diagram. Green/yellow from the relay goes to the inertia switch.
Reply
Old Oct 8, 2010 | 08:39 PM
  #16  
fordaillac's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 42
Likes: 0
From: Detroit
Default

well for starters i was looking at the ecm relay not the fuel pump relay.they had tapped into the ecm relay due to no power to fuel pump.i traced a bad fusible link near the solenoid and battery.next step is to replace link and start over once i get power to relay.
Reply




All times are GMT -4. The time now is 08:52 AM.