Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

need help idle problem

Thread Tools
 
Search this Thread
 
Old May 28, 2010 | 09:24 PM
  #1  
kennythehogue3's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 5
Likes: 0
Question need help idle problem

89 150 with 302 when first starts idle low to normal trying to stall but idle picks back up i checked everything seems ok has new tps and iac check engine light code says tps is above maximum out put,possible open
Reply
Old May 29, 2010 | 12:25 AM
  #2  
ymeski56's Avatar
Senior Member
Supporting Member

 
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Default

What is the actual code #?
Read this link: http://www.fordfuelinjection.com/?p=30
I'd do a Seafoam treatment also:
https://www.f150forum.com/f33/how-se...-1991-a-31505/

Last edited by ymeski56; May 29, 2010 at 12:32 AM.
Reply
Old May 29, 2010 | 09:05 AM
  #3  
mab6680's Avatar
Member
 
Joined: Oct 2009
Posts: 93
Likes: 0
Default

have you checked your base timing
Reply
Old May 29, 2010 | 02:44 PM
  #4  
kennythehogue3's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 5
Likes: 0
Default

its a code 53 and i checked all the timeing everything is rate in the normal range
Reply
Old May 29, 2010 | 04:34 PM
  #5  
ymeski56's Avatar
Senior Member
Supporting Member

 
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Default

Did you disconnect the battery for 5 min. after you replaced the sensor? Seafoamed yet?
Reply
Old May 31, 2010 | 12:55 AM
  #6  
kennythehogue3's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 5
Likes: 0
Default

i disconnected the battery for over 10 mins and i sea foamed as well,also my dad has the same truck in 2 wheel and there the same age and almost same milage but mine feels sluggish in comparison it feels like mine stumbles at acceleration im assuming due to this same issue

Last edited by kennythehogue3; May 31, 2010 at 01:03 AM.
Reply
Old May 31, 2010 | 04:07 AM
  #7  
ymeski56's Avatar
Senior Member
Supporting Member

 
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Default

Originally Posted by kennythehogue3
its a code 53 and i checked all the timeing everything is rate in the normal range
TPS above normal range.
Reply
Old Jun 2, 2010 | 01:54 PM
  #8  
kennythehogue3's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 5
Likes: 0
Default

i meant everything other than that i cant for the life of me figure out why it would be above maximum range
Reply




All times are GMT -4. The time now is 09:02 PM.