does anybody got any pics or info on how to wire a lighted visor into the truck to make it work. also would napa or any auto parts places carrie lenses for them. i cracked 3 of them and they are faded so i wanted some new ones anyway. thanks

 

as far as the wiring, on the pass kick panel, behind the panel, there is rumored a connector that is for the factory clearance lights, that would be a great place to wire it in.

 

Would that come on automaticly when i turn the lights on.

 

Yes, I would assume it would

 

yes it would come on when you turn on the parking lights

 

I just stabbed mine into the light switch itself on the switch leg that turns on the parking lights. I hear this can melt the switch though but I haven't checked yet. Been a few months.

 

might wanna jump on this set of lenses, the dont seem to pop up very often

http://www.ebay.com/itm/Lund-Moonvis...sories&vxp=mtr

if you need to rewire the whole thing, here is a kit for that too

http://www.truckaccessorizer.com/sto...moon_visor.htm

 

Ya i saw them. Waiting on reply to see if he takes money orders. I dont need to rewire it yet i just need to get new bulbs because only 1 was good and gonna see if napa can get them

 

Witch plug in do i use. Also i found this hole in the floor and im kinda POed

 

If the hole was on the drivers side you could P out it.