Help please!
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 10
Likes: 0
Help please!
Okay well i'm in the process of building my f150.
Just finished a 6" lift and put a new motor/trans in it.
The truck is a 96 5.0 e4od automatic
Will a 4.9 wiring harness from computer work?
From the junction box on the wheel well to the engine is a 92 5.0
Just finished a 6" lift and put a new motor/trans in it.
The truck is a 96 5.0 e4od automatic
Will a 4.9 wiring harness from computer work?
From the junction box on the wheel well to the engine is a 92 5.0
Mother Trucker
Joined: Jul 2009
Posts: 887
Likes: 8
From: Roggen, Co
Well no...the 4 9 is a 6 cylinder an yer 5 0 is a 8. Besides, I'd say if you went this far get a mass air flow harness off a wrecked truck. Just have to make sure you get a computer that will run your e4od.