Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.
View Poll Results: How do I fix this
What do I do next
0
0%
Help
0
0%
Voters: 0. You may not vote on this poll

Help please

Thread Tools
 
Search this Thread
 
Old May 28, 2022 | 07:30 PM
  #1  
Roy Ring's Avatar
Thread Starter
Please help
 
Joined: Mar 2021
Posts: 6
Likes: 0
From: Princess Anne Maryland
Default Help please

I have a 90 f150. When I back up to the porch to haul the trash to the landfill shut the truck off. It would not restart. Changed relays under the hood and still nothing. Bypassed inteia switch still nothing. What's next? Please help
Reply
Old May 28, 2022 | 08:10 PM
  #2  
nashville_bill's Avatar
Junior Member
 
Joined: Jul 2015
Posts: 8
Likes: 8
Default

Can you give more information? Does the starter work? Does it start and then stall? Etc.
Reply
Old May 28, 2022 | 08:15 PM
  #3  
Roy Ring's Avatar
Thread Starter
Please help
 
Joined: Mar 2021
Posts: 6
Likes: 0
From: Princess Anne Maryland
Default

It just cranks over. I haven't tried spraying either in the intake because I don't believe in that. I rebuilt this engine with my father and it has a lot of memories with it. It is cammed and bored 30 over but it was running dam good. It would lighten the front of this pickup off the road and then it just quit.
Reply
Old May 28, 2022 | 09:34 PM
  #4  
Slowbrick's Avatar
Senior Member
5 Year Member
 
Joined: May 2017
Posts: 422
Likes: 91
From: Plano, TX
Default

Test the distributor by swapping a known good one in temporarily.
Reply
Old May 28, 2022 | 09:58 PM
  #5  
Roy Ring's Avatar
Thread Starter
Please help
 
Joined: Mar 2021
Posts: 6
Likes: 0
From: Princess Anne Maryland
Default

I have a new distributor in it's only about a 1000 miles old. But I'll try that tomorrow
Reply
Old May 29, 2022 | 01:09 AM
  #6  
88xlt's Avatar
Senior Member
10 Year Member
 
Joined: Dec 2014
Posts: 1,037
Likes: 141
From: South Dakota
Default

I highly suspect you lost ignition. But I wouldn't replace any parts until I confirmed I lost ignition. Pull a spark plug wire off of the plug and hold it a little ways from the spark plug and watch and listen for spark.

If you find you lost spark, I highly suspect your ignition module on the side of the distributor went dead. I would certainly try or test that ignition module first, as it is very common for that to go dead on 1991 and older Ford trucks with the ignition module on the side of the distributor.
Reply
Old May 29, 2022 | 06:38 AM
  #7  
raski's Avatar
Senior Member
5 Year Member
 
Joined: Oct 2016
Posts: 3,702
Likes: 766
From: Parts Unknown
Default

Originally Posted by Roy Ring
I have a new distributor in it's only about a 1000 miles old. But I'll try that tomorrow
Why would you start by doing that and opening yourself up to another problem? You don't believe in starting fluid? Makes no sense. You could hang a fuel pressure gauge on the rail, if you believe in that.You first have to determine if it's fuel or ignition by doing some diagnostic work.. To start by changing out parts, even if you have them is not the route to go and potentially can create a new problem..

Last edited by raski; May 29, 2022 at 06:50 AM.
Reply
Old Jun 1, 2022 | 06:20 PM
  #8  
sswari's Avatar
Senior Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2020
Posts: 122
Likes: 38
Default

Originally Posted by Roy Ring
It just cranks over. I haven't tried spraying either in the intake because I don't believe in that. I rebuilt this engine with my father and it has a lot of memories with it. It is cammed and bored 30 over but it was running dam good. It would lighten the front of this pickup off the road and then it just quit.
May not be your favorite thing to do, but starter fluid would help eliminate the spark issue, and most likely won't hurt anything.
Reply




All times are GMT -4. The time now is 04:25 PM.