i am replacing the wheel bearings on my 95 f 150 4x4 5.0 and i got to the point where there is a nut around the axel the is holding the whole assembly on and i dont have the special socket to get it off. if you have done it where did you get the socket to take it off.

 

At the auto parts store.

 

x2....or in a pinch a hammer and cold chisel....but you'll need the socket to put it back on.....I THINK it's 1 1/16 but can't swear to it.

 

you can use a punch and a hammer, or check with your parts stores to see if they got axle nut sockets

 

auto hubs on my 95 have a big nut in the inside,most manual hubs have a small nut with 4 slots in them,either way..... auto parts store!