i have seen alotta pictures of trucks with clear headlights, is there anyway you can do this yourself without buying new headlights

 

Polish them or get a headlight restore kit. They usually have everything you need in them.

 

Get an SOS Pad, windex, a rag and a water hose. Put toothpaste on the SOS Pad, and spray the headlight with windex. Scrub the headlight hard with the SOS pad in small circular motions. Put some elbow grease into it. Then let it sit for about 5 to 10 minutes and spray more windex, then scrub some more. Rinse off with the hose. I did this and no more yellow plastic, they're just as clear as can be.

 

Uhhhhh.....No.........sorry, but an sos pad is too course. Very fine steel wool, 1200 followed by 2000 grit sand paper. Sos pads have no quality control for fine gauge wool and can damage plastic. Might have worked once, but is not a good idea. Sorry.

 

Like these?

 

Our stock headlights have serrations inside the lens for dispersion. You won't get a clear lens out of stock headlight housings.

 

I go 500 grit, 800 grit, 3000 wet sand, buff and polish compound. Not a clear lens but makes the stock look like brand new.

 

use cutter misquote spray only cutter works tho

 

X2 this is probably the best way to restore your lights. A rag and some gritty toothpaste does help, but not near the job of wet sanding.

 

X2. This is probably the best way to restore your headlights. A rag and some gritty tooth paste helps too, but not near the job of wet sanding.