I am in the process of converting my EFI over to a carb system, I am doing this because I am tired of all the computer and wiring problems I have been having. Its not a daily driver just an old farm truck. My only question is what am I needing to do to the fuel system? Thanks

 

Next you can find an 8-track to swap in.

 

get the fuel pump from a carbed f150 because the pumps for EFI use too much pressure.. other than that, i don't know.

 

Have 1995 F150 4x4 Auto. Going to switch back to Carb. Same as you are planning to do. What I am going to do is go with manual fuel pump and change the pickup in the tank. Just a thought.

 

I got it set up for vinyl , it just seems to skip alot.

 

You can use the existing electric fuel pump but you need an adjustable fuel pressure regulator so you can step down the pressure for carbureted.

 

Im pretty sure that is what you have to do ... If its anything like switching a gm over to carb.. you have to have a regulater.. becouse the FI blocks have no manual fuel pump location from 87 and on

Im not sure about a ford.. but you might check that

 

BOB you are correct the fuel injection engines do not have a place to mout the fuel pump on the timing chain cover.
A regulator would be the best bet, because you already have the pump. Plus a new timing chain cover will run at LEAST $60, and to change it, the water pump comes off, (replace it), the dampener an pullies have to come off, and you maight as well change the timing chain if your going that far. it would be cheaper and easier to do a regulator. I'm doing the same thing so I had to do my homework.

 

Thanks for the input. It oughta be back on the road shortly.

 

Forgot to mention reason going back to carb in my 1995 F150 4x4, Putting older BB for more power not gas mileage. Have 4:56 With detroit with 35s.
Want to have fun