I have a 92 f150 4x4 302 that i put an 87 3024x4 tranny in my truck and my truck will not come outta first gear i adjusted the cable on tranny and all any body have any idieas thanks

 

I've had this issue on my 95, but that was when my review mirror fell. This shorted the harness and blew a fuse. I'm not certain about the year of your tranny, but does it have a vacuum valve? There would be a vacuum line running from the manifold back to the tranny if it did. I had an 82 Merc AOD where the hose came off and it didn't like that too much.

 

It only has like a breather hold on top of tranny thats it

 

You have to have the vacuum modulator hooked up or the transmission will not shift. I do not whom told you do this but you should have put the e4od transmission in not the aod. The e40d is an electronic shift and the aod shifts by a TV cable.

The 92 does not have the fitting on the back of the throttle body for the vacuum line you need. So you may have a choice change the entire throttle body or put the right transmission in the truck.

Okay need to correct myself it may work but the TV cable is not correctly done and are very touchy. Make sure you have the TV settings correct or you will KILL the transmission.

DO NOT DRIVE IT WITH THE TV INCORRECTLY SET OR NOT HOOKED UP AT ALL!



clickclickracing.com is a great source of information for the AOD.

 

My friend knocked my mirror off one day, the next day it shifted VIOKENTLY. Sucked horribly. Didnt blow a fuse as far i know, but replaced the ecu and all is well now

 

Were is vacum think located and i had to put aod in my truck thats what it came with i didnt wanna change a hole bunch of stuff around

 

My trans code is t inside my door

 

first thing aod do not have a vacuum mod!!!! thay are controld only by tv cable and if it not set it a matter of second when driving the rig before it kills the trany.the vacuum mod are on c-4 c-5 c-6 tranys.so you did take out aod or was it e4od ?

 

Its was a aod tranny i pulled from my truck

 

double check fluid level and shift linkage.if the tv pressures are not correct it wont shift.google ajusting aod tv cable some good info on how adjust.it sound to me pressure are to low or the gov is pluged.