The KeyStone Kid

I currently have the base 302cu. Windsor.
I was wondering if a 351Cleaveland could be dropped in its place. And what other displacements would also fit.

NeverEnuff

Easiest swap would be to throw a 351 Windsor in there. your 302 is already windsor based so a lot of the stuff will already fit.

flareside93

Stock size went up to a 351 Windsor and in earlier models, Cleaveland blocks i do believe. i have the 351W in my 93. You can also do 383's or 402's with no major issues.

dr_bowtie

all of them will fit...the question is how much modifying do you want to do...?

427/428 cammer would look sweet in the f150...too bad they are really rare...lol

although a 700in monster would be more than the truck could ever handle

fordkicksass

are you gonna change out the tranny or keep the one thats in it? it makes a difference.lol.

flareside93

yeah and if you go higher displacement than the 351, you would have to look into changing transmission and beefing up frame and axle parts.

fordkicksass

the tranny from the 300I6, 302V8, and 351V8 will all bolt on the tranny. i dont know if any other engines will bolt up or not.

RyKR

351M has a big block bolt pattern so it won't bolt up and I think that the Cleveland has its own special bolt pattern. For simplicity, go with either the 351W or stroke the 302.

dirtcrew51m

351 cleveland has the same pattern as a regular small block. The best combo is a 351 windsor bottom\intake and cleveland heads.