jdt79

I have a 95 f150 with a 3 in lift and 33x12.50s. My 4x4 will not lock in. I have manual locking hubs and push button 4x4. I had it locked in 2 weeks ago and everything worked but now the button won't turn on to engage. Any help would greatly be appreciated.

Welder7018

The hubs won't lock or the push button 4x4 won't work?

jdt79

Hubs lock just can't get the push button to work.

Welder7018

Check for loose connection on the back of the switch. And check the fuses for the 4x4. And check connections on the t-case motor.

jdt79

Fuse is good where do I find connections to t case and switch?

Welder7018

Remove the black plastic shroud surrounding your instrument cluster.

Welder7018

Incase you were wondering what shroud this shroud



You need to pop these off to get two the screws that hold it on.

jdt79

Will it just come out?

jdt79

So it should just come out then?

Welder7018

It should once you remove the screws. They are star bits. T-25 or t-30 I believe. Then you can access your trans case switch and check the connections.