Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

PLEASE HELP! need window up asap

Thread Tools
 
Search this Thread
 
Old 02-23-2012, 12:55 PM
  #31  
Member
 
papa tiger's Avatar
 
Join Date: Nov 2011
Posts: 32,108
Received 239 Likes on 223 Posts

Default

See if you can pick up a 401 and a set of driver door switches from you parts yard. You have a diode or switch link problem.
Old 02-23-2012, 04:00 PM
  #32  
Member
Thread Starter
 
Joe1199's Avatar
 
Join Date: Jul 2011
Location: Abilene, TX
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts

Default

@papa: I haven't ran a HEC test. I will look though the manual and do a google search tonight to see how to run it. When you say reset button, you mean the reset button that is on the front panel that clears out the trip meter? I just want to make sure i'm using the right one.
@Flyn: if you are talking about hitting the window motor, i've already tried that, plus i got the window up already. If your talking about hitting the connector that goes to the driving window controls, i haven't done that yet but will keep that in mind. I haven't taken to a ford because it isn't under warranty plus that are asking $85 just to look at it, **** that lol but thanks for the tip.
@07 F150: if i take the switch apart, i will do so at work. i can get some steel brushes there to clean the contacts. Thanks for the tip.
Old 02-23-2012, 04:17 PM
  #33  
Member
Thread Starter
 
Joe1199's Avatar
 
Join Date: Jul 2011
Location: Abilene, TX
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts

Default

i just did the HEC test and couldn't find the CanBus test? i did come across a "diag trouble code: none" but that was about it. am i missing something?
Old 02-23-2012, 05:29 PM
  #34  
Member
 
papa tiger's Avatar
 
Join Date: Nov 2011
Posts: 32,108
Received 239 Likes on 223 Posts

Default

You ran the tests. Your CanBus is good. Look to a semiconductor failure if you switches are all good. Diodes block the return signal to reroute it if your circuit breaker is ok. ( 401 )
Old 02-23-2012, 08:43 PM
  #35  
Member
 
papa tiger's Avatar
 
Join Date: Nov 2011
Posts: 32,108
Received 239 Likes on 223 Posts

Default 2005 power window schematic

Here is a diagram of your power windows. Notice the down relay on the right side right of master control switch.

Last edited by papa tiger; 12-10-2018 at 09:17 PM.
Old 02-23-2012, 08:45 PM
  #36  
Member
 
papa tiger's Avatar
 
Join Date: Nov 2011
Posts: 32,108
Received 239 Likes on 223 Posts

Default 2005 diagram

Here is the rest of the wiring for the window

Last edited by papa tiger; 12-10-2018 at 09:17 PM.
Old 02-24-2012, 04:01 PM
  #37  
Member
Thread Starter
 
Joe1199's Avatar
 
Join Date: Jul 2011
Location: Abilene, TX
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts

Default

@papa: I have the 1st picture saved on my phone lmao but i haven't seen the second one before. What did you put in the google search bar to come up with it?
Old 02-24-2012, 04:35 PM
  #38  
Member
 
papa tiger's Avatar
 
Join Date: Nov 2011
Posts: 32,108
Received 239 Likes on 223 Posts

Default

It's for power rear glass and ford f150.
Old 02-24-2012, 05:54 PM
  #39  
Member
Thread Starter
 
Joe1199's Avatar
 
Join Date: Jul 2011
Location: Abilene, TX
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts

Default

ok cool. i have that on my truck so i might do ahead and download that just in case



Quick Reply: PLEASE HELP! need window up asap



All times are GMT -4. The time now is 02:13 PM.