DTC with edge evolution
#21
Mark
iTrader: (1)
and give that cowl some attention too..
#22
Senior Member
Thread Starter
Thanks summers Yes it is a specter, I will give the paper filter a shot, I only have it set up like this for the mud, once the paper one gets mud or water on it, it doesn't work worth a damn and with this one I can just clean it off and throw it back on. The piece that cracked was right before the throttle body. In the picture you see it's chrome and had a 2" band clamp onto the throttle body.
#23
Senior Member
Thread Starter
The thing I have clamped in my air box is a piece of rubber. My clamp was kind of loose and I wanted to make sure it's sealed as tight as I can get it
#24
Senior Member
Thread Starter
#25
Mark
iTrader: (1)
remove it ...clean it and shoot it with some paint
#26
TOTM November 2019
iTrader: (2)
Thanks summers Yes it is a specter, I will give the paper filter a shot, I only have it set up like this for the mud, once the paper one gets mud or water on it, it doesn't work worth a damn and with this one I can just clean it off and throw it back on. The piece that cracked was right before the throttle body. In the picture you see it's chrome and had a 2" band clamp onto the throttle body.
#27
Senior Member
Thread Starter
the cracked piece was fixed a long time ago. I always had an issue where mud would get into the sealed air box and cake up half the filter. But I have pretty much stopped off roading at all after the my 3k dollar transmission rebuild because there water was in it. I'll try throwing in a regular paper filter and see if that changes anything. If not I'm going to have to call edge to see what they can do about it.