sigma pi

I got all my raptor stuff on my truck and the RPG 1.5 upper is rubbing on full lock. I was going to go to 17 inch rims and 0 offset.

Going up to Atlas tomorrow to get my springs

DezertNoob

what are you doing on the back?

sigma pi

Plain jane, just the new springs and stock raptor shocks. Going to get bedsides because the wheels are flush now, but once the new wheels go on, it will poke out.

RSKtakR

Resurrecting an old thread here but ..... I'm wanting to put 22's on my 2017 4x4 with a 2.5" level. I currently have stock sport wheels and I just put a full set of new Terra Grappler G2's on in 295/60r20. I have 1.5" thick spacers. I read through this thread and noticed the OP has a 22 x 9.5 wheel with the PLUS 30 offset, no spacers and a 285/55R22 tire. So would I need to stick with a plus offset vs a negative offset wheel to not have any rubbing issues? I would like to run a 22x10 wheel and it seems like the offset that I see most often is a -25mm.. So these would probably rub the crash bars like crazy possibly? I wouldn't be against a 0 offset and running my 1.5" spacers either. I wouldn't get rid of my crash bars but if rubbing them was an issue then I would just pull the front bumper off and swap the crash bars around to gain some clearance.